Nanomax Hydrophobic Wet Look Sealer for Paving&Concrete, UV and Oleophobic Protection
Nano Home Protection Solutions, Concrete, Paving, Primer, Stone, Protection / Waterproofing Solutions, Protection/Waterproofing Solutions, Protection/Waterproofing Solutions, Nano paints
Wet Look Sealer for Paving&Concrete, 2 in 1 hybrid product. Perfect combination of varnish and waterproofing.
Features:
• Surface rejuvenation with more vivid result
• Durable against weather conditions and UV radiation
• High water-repellency
• High opacity .
Application hints:
1. When the product is applied on very low porosity substrates, a film layer might occur which will affect surface’s properties.
2. Additional coats may be applied to increase colour intensity.
3. Αvoid excess material on surface during application. Use consumption rates as described to ensure durability and resistance to mechanical damage.
4. Cleaning with water on a regular basis will keep the surface’s colour vibrant.
5. Slight colour variations will occur, depending on the substrate’s original colour.
Unlike other common products, this varnish possesses the corresponding properties, thanks to which products gain resistance to water, oil, UV radiation and other adverse weather conditions.
Conceals slight imperfections, blemishes and discolouration. Increases resistance to moss, fungus and mould growth.
Available colour : Translucent
Important! The product does not require dilution.
Applies in 2 coats, 2-4 hours apart on a clean, dry surface.
Coverage: 1L - 5-10 sqm/l/layer
5L - 30-50 sqm/layer
NOTE: IN THE SPECIFICATIONS SECTION YOU WILL FIND THE TECHNICAL DATA SHEET AND THE PRODUCT SAFETY DATA SHEET IN PDF FORMAT!
SHAKE WELL BY TURNING THE CAN UPSIDE DOWN BEFORE APPLICATION!
SHAKE WELL BY TURNING THE CAN UPSIDE DOWN BEFORE APPLICATION!
Pave Plus Paint, Hydrophobic Paint, Protection for Concrete and Paving, Nanomax
Nano paints, Home, Industrial, Protection / Waterproofing Solutions, Protection/Waterproofing Solutions, Protection/Waterproofing Solutions, Nano Home Protection Solutions, Protection / Waterproofing Solutions
NanoMax Multi-Surface Cleaning Solution for Stone, Pavement, Concrete, Granite, and Travertine – Eco-Friendly Stain Removal
Pavement and Concrete Cleaning Solutions, Cleaning Solutions for Paving, Stone, Concrete, Home, Industrial, Protection/Waterproofing Solutions, Stone Cleaning Solutions, Nano Home Protection Solutions, Terrace, Solutions for cleaning stone, Terrace
NanoMax Multi-Surface Cleaning Solution for Stone, Pavement, Concrete, Granite, and Travertine Nanomax Cleaner Pro ( DeSalin C ) for natural stone surfaces, concrete, paving etc.
Nanomax Cleaner Pro ( DeSalin C ) is a special cleaner based on a concentrated natural acid, highly effective in removing residues from cement, mortar, grout, plaster, natural or artificial stone surfaces. It is ideal for building facades, concrete slabs, paving slabs, natural stone surfaces, clay tiles and other clay objects, salt deposits created as a result of efflorescence. Remove the moss and fungus. CHARACTERISTICS: Cleans surfaces of stains and limescale. Removes moss, lichens and fungi. Easy to apply. APPLY: Nanomax Cleaner Pro ( DeSalin C ) undiluted or in a dilution ratio of up to 1:5 for lightly stained surfaces. Test first on a small surface. New cement surfaces should be allowed to mature before the detergent is applied. Wait for Cleaner Pro to work on the surface for 2-3 minutes. Remove residue by scrubbing with a stiff brush (do not use a wire brush). After application, rinse with plenty of water. For extremely dirty surfaces, repeat the procedure if necessary. Important: CLEANER PRO ( DeSalin C ) is a citric acid-based detergent that is very strong if applied undiluted on surfaces. It can affect surfaces! Should be diluted 1:5, and if does not produce the desire effect, the dilution can be reduced to 1:1 or used undiluted. NEVER apply any undiluted acidic formulation on polished marble or stone. The glossiness will disappear. The product is not recommended for cleaning decorative tiles or any type of limescale on sanitary ware. Certain customers have no problem applying DeSalin C/K on flamed marble or stone (non-polished), which are also prone to dirt accumulation. They start with a 1:5 dilution up to the concentrated form to find the optimum balance between etching and dirt removal. The producer will not take responsibility, as each type of marble or stone has its own characteristics (acid resistance, hardness, colourants, etc). NOTE: IN THE SPECIFICATIONS SECTION YOU WILL FIND THE TECHNICAL DATA SHEET AND THE PRODUCT SAFETY DATA SHEET IN PDF FORMAT!
DECK OIL WB HYBRID, Water Based Wood Protection Coating, SurfaPaint 2,5 L, NanoPhos
Home, Protection/Waterproofing Solutions, Nano Home Protection Solutions, Wood, Protection / Waterproofing Solutions
SurfaPaint Deck Oil WB Hybrid is a water-based alkyd-polyurethane modified solution for surfaces made of new and damaged wood surfaces such as decking, fencing, gazebos, iroko, teak etc.
Its innovative formula combines the increased durability and adhesion of hybrid coatings, water resistance and traditional oils for wood and the low odour of aqueous base coats.
It penetrates and nourishes the wood surface, protecting it from chemicals, water, UV radiation and weather conditions.
Its application improves the natural appearance of the surface wood, providing a light satin finish and at the same time prevents cracking, rotting and drying of the wood.
SurfaPaint Deck Oil WB Hybrid is ideal for protection and rejuvenation natural, new or old wooden surfaces, vertical or horizontal, absorbent or non-absorbent surfaces, indoor and/or outdoor, consisting of wood such as iroko, teak, pine, etc.
Recommended for applications where low odour or absence of solvents is required.
Not recommended for non-wood surfaces.
Benefits:
- High protection against UV radiation and weathering;
- Strong adhesion to wood substrates;
- Provides increased resistance to chemicals, water and sun protection;
- Odourless and environmentally friendly;
- Preserves and protects the natural appearance of the wood;
- Natural, transparent satin finish that brings out the colour of the wood;
- It has twice the resistance of ordinary wood preservative oils.
Nanomax guarantee : 100%
NOTE: IN THE SPECIFICATIONS SECTION YOU WILL FIND THE TECHNICAL DATA SHEET AND THE PRODUCT SAFETY DATA SHEET IN PDF FORMAT!
Protection Coating against oil & water, glossy or porous surfaces, tiles, marble, granite, artificial stone, SurfaPore T, NanoPhos 1L
Nano Home Protection Solutions, Concrete, Nano paints, Home, Paving, Primer, Protection / Waterproofing Solutions, Protection/Waterproofing Solutions, Protection/Waterproofing Solutions, Sandstone, Protection / Waterproofing Solutions
SurfaPore™ T Stain protection and waterproofing for marble, granite and porcelain tiles.
SurfaPore ™ T is a water-based product modified with nanoparticles that fit into the pores of a polished surface, penetrating and "filling" pores that can accumulate dirt. These nanoparticles have the ability to self-polymerise and create an impermeable network of inert material.
After modification, dirt particles cannot penetrate the micro-porosity of the surface (marble, granite or polished sandstone). Therefore, an important and value-adding goal has been achieved: permanent pore impregnation, providing stain protection and easy cleaning.
In addition to stain protection, the molecular design of SurfaPore™ T nanoparticles induces an additional useful property: the hydrophobic fragment, attached to the top of the core nanoparticles, is responsible for creating a continuous hydrophobic layer that protects each tile.
Ideal for waterproofing and stain protection for sensitive or polished surfaces. Seals pores without forming a film, porcelain tiles and other "non-absorbent" surfaces.
CHARACTERISTICS:
The most effective and nanotechnology-based. Durable and UV resistant. It does not change the natural appearance. Easy to apply. Water-based. Economic.
Application:
Ideal for sensitive or polished surfaces such as marble and granite.
Application tip: Make a test application to an invisible area of the surface. Before the product dries, remove excess material with a dry tissue.
On surfaces that have been applied over waterproofing products or on already modified surfaces or other waterproofing, a test application should be carried out on a small area prior to full application for any adhesion problems.
All tools and equipment should be cleaned immediately after use with a thinner if necessary.
NOTE: IN THE SPECIFICATIONS SECTION YOU WILL FIND THE TECHNICAL DATA SHEET AND THE PRODUCT SAFETY DATA SHEET IN PDF FORMAT!